CygNet Native Operations

Enterprise Objects > Enterprise Operations > CygNet Native Operations

CygNet Native Operations

The individual CygNet Native Operations supported by the Enterprise Integration Suite are shown in the following table.

Each operation is grouped according to its target data and its ability to read or modify that data.

Type	Read Operations	Write Operations
Alarm	GetCurrentAlarms
Alarm History	GetAlarmHistory
Devices	GetDeviceIds GetFacilityLinks
Facility	GetFacilityAttrList GetFacilityAttrMetadata
		AddFacility DeleteFacility UpdateFacility
		AddFacilities DeleteFacilities UpdateFacilities
General	GetServiceInfoItems
History	GetHistoryValues
History	GetHistoryRecordSet
Point	GetFacilityPointList GetPointAttrList GetUdcListForFacilities	UpdatePoints
		AddPoint DeletePoint UpdatePoint
		AddPoints DeletePoints
Point Config	GetPointAttrMetadata
Table	GetTableEntries GetTableNames GetUdcCategories GetUdcInfo GetUdcListForCategories	AddTables AddTableEntries DeleteTables DeleteTableEntries UpdateTableEntries

For each group of operations, the Operation Service Filter indicates the service types through which an Enterprise Operations device filters the request. The Operation Service Filter is defined in the Enterprise Operations device instance in the DDS.